Removing the integrated storage controller cardBefore you beginCAUTION Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.3. Remove the cooling shroud.4. Keep the Phillips #2 screwdriver ready.Procedure1. Loosen the screws that secure the integrated storage controller cable to the integratedstorage controller card connector on the system board.2. Lift the integrated storage controller cable away from the integrated storage controller.3. Lift one end of the card and angle it to disengage the card from the integrated storagecontroller card holder on the system board.4. Lift the card out of the system.Figure 62 Removing the integrated storage controller carda. integrated storage controller cableInstalling and removing system components142 Dell PowerEdge R430 Owner's Manual
