Port ISets the drive type of the selected device. For Embedded SATA settings in ATA mode, setthis field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support.For AHCI or RAID mode, BIOS support is always enabled.OptionDescriptionModelSpecifies the drive model of the selected device.Drive TypeSpecifies the type of drive attached to the SATA port.CapacitySpecifies the total capacity of the hard drive. This field is undefined for removable mediadevices such as optical drives.Port JSets the drive type of the selected device. For Embedded SATA settings in ATA mode, setthis field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support.For AHCI or RAID mode, BIOS support is always enabled.OptionDescriptionModelSpecifies the drive model of the selected device.Drive TypeSpecifies the type of drive attached to the SATA port.CapacitySpecifies the total capacity of the hard drive. This field is undefined for removable mediadevices such as optical drives.Integrated DevicesYou can use the Integrated Devices screen to view and configure the settings of all integrateddevices including the video controller, integrated RAID controller, and the USB ports.Viewing Integrated DevicesTo view the Integrated Devices screen, perform the following steps:Procedure1. Turn on, or restart your system.2. Press F2 immediately after you see the following message:F2 = System SetupNote: If your operating system begins to load before you press F2, wait for the systemto finish booting, and then restart your system and try again.3. On the System Setup Main Menu screen, click System BIOS.Pre-operating system management applications74 Dell PowerEdge R430 Owner's Manual
