2. Press F2 immediately after you see the following message:F2 = System SetupNote: If your operating system begins to load before you press F2, wait for the systemto finish booting, and then restart your system and try again.3. On the System Setup Main Menu screen, click System BIOS.4. On the System BIOS screen, click Network Settings.5. On the Network Settings screen, click UEFI iSCSI Settings.UEFI iSCSI Settings detailsThe UEFI ISCSI Settings screen details are explained as follows:OptionDescriptionISCSI Initiator NameSpecifies the name of the iSCSI initiator (iqn format).ISCSI Device n (n = 1 to 4)Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for theiSCSI device automatically.System SecurityYou can use the System Security screen to perform specific functions such as setting the systempassword, setup password and disabling the power button.Viewing System SecurityTo view the System Security screen, perform the following steps:Procedure1. Turn on, or restart your system.2. Press F2 immediately after you see the following message:F2 = System SetupNote: If your operating system begins to load before you press F2, wait for the systemto finish booting, and then restart your system and try again.3. On the System Setup Main Menu screen, click System BIOS.4. On the System BIOS screen, click System Security.System Security Settings detailsAbout this taskThe System Security Settings screen details are explained as follows:OptionDescriptionPre-operating system management applicationsDell PowerEdge R430 Owner's Manual 61
