Device SettingsEnables you to configure device settings.System BIOSYou can use the System BIOS screen to edit specific functions such as boot order, systempassword, setup password, set the RAID mode, and enable or disable USB ports.Viewing System BIOSTo view the System BIOS screen, perform the following steps:Procedure1. Turn on, or restart your system.2. Press F2 immediately after you see the following message:F2 = System SetupNote: If your operating system begins to load before you press F2, wait for the systemto finish booting, and then restart your system and try again.3. On the System Setup Main Menu screen, click System BIOS.System BIOS Settings detailsAbout this taskThe System BIOS Settings screen details are explained as follows:OptionDescriptionSystem InformationSpecifies information about the system such as the system model name, BIOS version, andService Tag.Memory SettingsSpecifies information and options related to the installed memory.Processor SettingsSpecifies information and options related to the processor such as speed and cache size.SATA SettingsSpecifies options to enable or disable the integrated SATA controller and ports.Boot SettingsSpecifies options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI andBIOS boot settings.Network SettingsSpecifies options to change the network settings.Integrated DevicesSpecifies options to manage integrated device controllers and ports and specify relatedfeatures and options.Pre-operating system management applicationsDell PowerEdge R430 Owner's Manual 57
