Setup menuNote: When you select an option in the Setup menu, you must confirm the option beforeproceeding to the next action.OptionDescriptioniDRACSelect DHCP or Static IP to configure the network mode. If Static IP is selected, theavailable fields are IP, Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable DNSand to view domain addresses. Two separate DNS entries are available.Set errorSelect SEL to view LCD error messages in a format that matches the IPMI description in theSEL. This enables you to match an LCD message with an SEL entry.Select Simple to view LCD error messages in a simplified user-friendly description. For moreinformation about error messages, see theDell Event and Error Messages Reference Guide atDell.com/openmanagemanuals > OpenManage software.Set homeSelect the default information to be displayed on the Home screen. See View menu sectionfor the options and option items that can be set as the default on the Home screen.View menuNote: When you select an option in the View menu, you must confirm the option beforeproceeding to the next action.OptionDescriptioniDRAC IPDisplays the IPv4 or IPv6 addresses for iDRAC8. Addresses include DNS (Primary andSecondary), Gateway, IP, and Subnet (IPv6 does not have Subnet).MACDisplays the MAC addresses for iDRAC, iSCSI, or Network devices.NameDisplays the name of the Host, Model, or User String for the system.NumberDisplays the Asset tag or the Service tag for the system.PowerDisplays the power output of the system in BTU/hr or Watts. The display format can beconfigured in the Set home submenu of the Setup menu.TemperatureDisplays the temperature of the system in Celsius or Fahrenheit. The display format can beconfigured in the Set home submenu of the Setup menu.Dell PowerEdge R430 system overview20 Dell PowerEdge R430 Owner's Manual