Drive status indicator code ConditionFlashes green slowly Drive rebuilding.Solid green Drive online.Flashes green for three seconds, amber for three seconds, andthen turns off after six secondsRebuild stopped.System health and system ID indicator codesThe system health and system ID indicator is located on the left control panel of your system.Figure 12. System health and system ID indicatorsSystem health and system ID indicatorcode ConditionSolid blue Indicates that the system is turned on, system is healthy, and system ID mode is not active.Press the system health and system ID button to switch to system ID mode.Blinking blue Indicates that the system ID mode is active. Press the system health and system ID button toswitch to system health mode.Solid amber Indicates that the system is in fail-safe mode. If the problem persists, see the Getting helpsection.Blinking amber Indicates that the system is experiencing a fault. Check the System Event Log or the LCDpanel, if available on the bezel, for specific error messages. For more information about errormessages, see the Dell Event and Error Messages Reference Guide at www.Dell.com/openmanagemanuals > OpenManage software.28 Diagnostics and indicators
