Figure 67. Removing the right control panelNext step1 Install the right control panelInstalling the right control panelPrerequisite1 Follow the safety guidelines listed in Safety instructionsSteps1 Route the control panel cable through the side wall and the guide slots in the system.NOTE: Route the cable properly to prevent the cable from being pinched or crimped.2 Align and insert the right control panel assembly in the slot on the system.3 Using the appropriate screwdriver, tighten the screws that secure the right control panel.4 Connect the control panel cable to the connector on the system board.Disassembly and reassembly 97
