Figure 24. Removing the system coverInstalling the system coverPrerequisites1 Follow the safety guidelines listed in Safety instructions2 Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.Steps1 Align the tabs on the system cover with the guide slots on the system.2 Push the system cover latch down.The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system cover latchlocks into place.3 Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the latch release lock clockwise to the locked position.NOTE: The images shown here are for representation only and the actual configuration of your system may vary.62 Disassembly and reassembly
