NOTE: To avoid damaging the backplane, ensure that you move the control panel cables from the cable routing clipsbefore removing the backplane.Figure 53. Removing the drive backplaneInstalling the drive backplanePrerequisites1 Follow the safety guidelines listed in Safety instructions2 Follow the procedures in Before working inside your system3 Remove the drives.NOTE: To avoid damaging the backplane, ensure to move the control panel cables from the cable routing clips before removingthe backplane.NOTE: Route the cable properly when you replace it to prevent the cable from being pinched or crimped.Steps1 Align the slots on the backplane with the hooks on the system.2 Lower the backplane until the blue release tabs click into place.84 Disassembly and reassembly
