• Role • Service Tag Launch IOM GUIViewing Server Model Name and Service TagYou can view the model name and service tag of each server instantly using the following steps:1. In the left pane, under Server Overview tree node, all the servers (SLOT-01 to SLOT-04) appear in the servers list. If a server isnot present in a slot, the corresponding image in the graphic is grayed out. When a full height server occupies slot 1 and slot 3,slot 3 will show the slot name as Extension of 1.2. Pause the cursor over the slot name or slot number of a server. A tool tip is displayed with the server’s model name and servicetag (if available).Viewing Chassis SummaryTo view the chassis summary information, in the left pane, click Chassis Overview → Properties → Summary.The Chassis Summary page is displayed. For more information about this page, see the Online Help.Viewing Chassis Controller Information and StatusTo view the chassis controller information and status, in the CMC Web interface, click Chassis Overview → Chassis Controller.The Chassis Controller Status page is displayed. For more information, see the Online Help.Viewing Information and Health Status of All ServersTo view the health status of all the servers, do one of the following:• Click Chassis Overview. The Chassis Health page displays a graphical overview of all the servers installed in the chassis. Serverhealth status is indicated by the overlay of the server subgraphic. For more information about the chassis health, see the OnlineHelp.• Click Chassis Overview → Server Overview. The Servers Status page provides an overview of the servers in the chassis. Formore information, see the Online Help.Viewing Health Status and Information for Individual ServerTo view health status for individual servers, do any of the following:1. Go to Chassis Overview → Properties → Health.The Chassis Health page displays a graphical overview of all the servers installed in the chassis. Server health status isindicated by the overlay of the server subgraphic. Move the cursor to hover over an individual server subgraphic. Acorresponding text hint or screen tip provides additional information for that server. Click the server subgraphic to view the I/OModule information on the right. For more information, see the Online Help.2. Go to Chassis Overview and expand Server Overview in the left pane. All the servers (1–4) appear in the expanded list. Clickthe server (slot) you want to view.The Server Status page (separate from the Servers Status page) provides the health status of the server in the chassis and alaunch point to the iDRAC web interface, which is the firmware used to manage the server. For more information, see theOnline Help.NOTE: To use the iDRAC web interface, you must have an iDRAC user name and password. For more informationabout iDRAC and the using the iDRAC web interface, see theIntegrated Dell Remote Access Controller User’sGuide.66
