|
corresponding text hint or screen tip is displayed. The text hint provides additional information about the KVM. Click the KVMsub-graphic to view the KVM information in the right pane.2. Alternatively, click Chassis Overview → Front Panel.On the Status page, under the KVM Properties section, you can view the status and properties of a KVM associated with thechassis. For more information, see the Online Help.Viewing LCD Information and HealthTo view the health status of an LCD:1. In the left pane, click Chassis Overview.The Chassis Health page is displayed. The left pane displays the front view of the chassis. LCD health status is indicated by theoverlay of the LCD sub-graphic.2. Move the cursor over the LCD subgraphic. The corresponding text hint or screen tip provides additional information on the LCD.3. Click the LCD sub-graphic to view the LCD information in the right pane. For more information, see the Online Help.Alternatively, go to Chassis Overview → Front Panel → Properties → Status. On the Status page, under the LCD Properties,you can view the status of the LCD available on the chassis. For more information, see Online Help.Viewing Information and Health Status of Temperature SensorsTo view the health status of the temperature sensors:In the left pane, click Chassis Overview → Temperature Sensors.The Temperature Sensors Status page displays the status and readings of the temperature probes on the entire chassis(chassis and servers). For more information, see Online Help.NOTE: The temperature probes value cannot be edited. Any change beyond the threshold generates an alert thatcauses the fan speed to vary. For example, if the CMC ambient temperature probe exceeds the threshold, the speedof the fans on the chassis increases.Viewing Storage Capacity and Status of the Storage ComponentsTo view the capacity and fault-tolerant status of the storage components, do one of the following:1. Go to Chassis Overview.The Chassis Health page is displayed. The Storage capacity details, the Fault Tolerant Mode (Active/Passive), and FaultTolerant Status (Enabled) information is displayed on the right pane. This fault-tolerance information is displayed only if the faulttolerant feature is enabled for the storage components.The lower section of chassis graphics provides the left view of the chassis. Move the cursor over the storage component sub-graphic. The text hint provides additional information about the storage component. Click the storage component subgraphic toview the related information in the right pane.2. Alternatively, in the left pane, click Chassis Overview → Storage → Properties → Status.The Storage Overview page is displayed with the following information:• View the graphic summary of the physical disk drives installed in the chassis and their status.• View the summary of all the storage components with links to their respective pages.• View the used capacity and total capacity of the storage.• View controller information.NOTE: In case of a fault-tolerant controller, the name format is: Shared> (Integrated ).For example, the active controller is Shared PERC8 (Integrated 1) and the peer controller is Shared PERC8(Integrated 2).• View recently-logged storage events.69
|
