Setting Up and Using Your Computer 193 Attach the parallel printer cable to the parallel connector on the computer and tightenthe two screws. Attach the cable to the connector on the printer and snap the two clipsinto the two notches.4 Turn on the printer and then turn on the computer. If the Add New Hardware Wizardwindow appears, click Cancel.5 Install the printer driver if necessary. See the documentation that came with yourprinter.Connecting a USB PrinterNOTE: You can connect USB devices while the computer is turned on.1 Complete the operating system setup if you have not already done so.2 Install the printer driver if necessary. See the documentation that came with yourprinter.parallel printercableparallel connector on computerconnector on printerscrews (2) clips (2)notches (2)
