IPv6 Routing Commands 105750IPv6 Routing CommandsThe IPv6 version of the routing table manager provides a repository for IPv6routes learned by dynamic routing protocols or static configuration. RTO6manages dynamic and static IPv6 routes, redistributes routes to registeredprotocols, supports ECMP routes, and supports multiple routes to the samedestination, sorted by preference. IPv6 routing only operates over VLANinterfaces.IPv6 Limitations & RestrictionsThe following limitations apply:• IPSec support is not available.• The DHCPv6 server does not support stateful address configuration.• Automated router renumbering is not supported.Commands in this ChapterThis chapter explains the following commands:clear ipv6 neighbors ipv6 mld query-max-response-timeipv6 route show ipv6 mld-proxygroups detailclear ipv6 statistics ipv6 mld router ipv6 route distance show ipv6 mld-proxyinterfaceipv6 address ipv6 mtu ipv6 unicast-routingshow ipv6 mld trafficipv6 enable ipv6 nd dadattemptsping ipv6 show ipv6 neighborsipv6 hop-limit ipv6 nd managed-config-flagping ipv6 interface show ipv6 routeipv6 host ipv6 nd ns-interval show ipv6 brief show ipv6 routepreferences
