SSH Commands 1615show crypto key pubkey-chain sshUse the show crypto key pubkey-chain ssh command in Privileged EXECmode to display SSH public keys stored on the switch.Syntaxshow crypto key pubkey-chain ssh [usernameusername] [fingerprint bubble-babble | hex]•username — Specifies the remote SSH client username. (Range: 1–48characters)• bubble-babble — Fingerprints in Bubble Babble format.• hex — Fingerprint in Hex format. If fingerprint is unspecified, it defaultsto Hex format.Default ConfigurationThis command has no default configuration.Command ModePrivileged EXEC mode, Config mode and all Config sub-modesUser GuidelinesThis command has no user guidelines.ExampleThe following example displays all SSH public keys stored on the switch.console#show crypto key pubkey-chain sshUsername Fingerprint-------- -------------------------------------------------bob 9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86john 98:F7:6E:28:F2:79:87:C8:18:F8:88:CC:F8:89:87:C8The following example displays the SSH public called "dana."console#show crypto key pubkey-chain ssh username danaUsername: danarsa key data:
