System Management Commands 1677If you supply a value for slot/port, the following additional informationappears as shown in the table below.Default ConfigurationThis command has no default configuration.Command ModeUser EXEC, Config mode and all Config sub-modesUser GuidelinesThe command has no user guidelines.show supported cardtypeUse the show supported cardtype command in User EXEC mode to displayinformation about all card types supported in the system. If a card index isentered, then the command displays information about specific card typessupported in the system. Card index values are specific to each family ofproducts. Use the generic form (without specifying an index) to display all thecard types for a product family.Pluggable Cards are pluggable or non-pluggable inthe slot.Parameter DescriptionInserted Card Model Identifier The model identifier of the card insertedin the slot. Model identifier is a 32-character field used to identify a card.This field is displayed only if the slot isfull.Inserted Card Description The card description. This field isdisplayed only if the slot is full.Configured Card Description The description of the card preconfiguredin the slot.Parameter Description
