1718 Time Ranges CommandsCommand ModeGlobal ConfigurationUser GuidelinesThe CLI mode changes to Time-Range Configuration mode when yousuccessfully execute this command.Exampleconsole(config)#time-range timeRange_1absoluteUse the absolute command in Time Range Configuration mode to add anabsolute time entry to a time range.Use the no form of this command to delete the absolute time entry in thetime range.Syntaxabsolute {[starttime date] [endtime date ]}no absoluteParameter DescriptionParameter DescriptionStart time date Time and date at which the configuration that referenced thetime range is in effect. The time is expressed in a 24-hour clock,in the form of hours:minutes. For example, 8:00 is 8:00 am and20:00 is 8:00 pm. The date is expressed in the format daymonth year. If no start time and date are specified, theconfiguration statement is in effect immediately.End time date Time and date at which the configuration that referenced thetime range is no longer in effect. Same time and date format asdescribed for the start. The end time and date must be after thestart time and date. If no end time and date are specified, theconfiguration statement is in effect indefinitely.
