506 IGMP Snooping Querier Commandsconsole(config)#ip igmp snooping querier election participateip igmp snooping querier query-intervalThis command sets the IGMP Querier Query Interval time, which is theamount of time in seconds that the switch waits before sending anotherperiodic query. The no form of this command sets the IGMP Querier QueryInterval time to its default value.Syntaxip igmp snooping querier query-intervalinterval-countno ip igmp snooping querier query-interval•interval–count — Amount of time in seconds that the switch waits beforesending another general query. (Range: 1-1800)Default ConfigurationThe query interval default is 60 seconds.Command ModeGlobal Configuration modeUser GuidelinesThe value of this parameter should be larger than the IGMP Snooping MaxResponse Time.ExampleThe following example sets the query interval to 1800:console(config)#ip igmp snooping querier query_interval 1800ip igmp snooping querier timer expiryThis command sets the IGMP Querier timer expiration period which is thetime period that the switch remains in Non-Querier mode after it hasdiscovered that there is a Multicast Querier in the network. The no form ofthis command sets the IGMP Querier timer expiration period to its defaultvalue.
