Command Groups 152Management ACLModehistory Enables the command history function. LChistory size Changes the command history buffer size for aparticular line.LCline Identifies a specific line for configuration andenters the line configuration command mode.GCshow line Displays line parameters. UEspeed Sets the line baud rate. LCa. For the meaning of each Mode abbreviation, see Mode Types on page 81.Command Description Mode aa. For the meaning of each Mode abbreviation, see Mode Types on page 81.deny (management) Defines a deny rule. MAmanagement access-class Defines which management access-list is used. GCmanagement access-list Defines a management access-list, and entersthe access-list for configuration.GCpermit (management) Defines a permit rule. MAshow management access-classDisplays the active management access-list. PEshow management access-listDisplays management access-lists. PECommand Description Mode aconfigure terminal Gets to the configure line. This command isequivalent to the configure command.PEdo Executes commands available in PrivilegedEXEC mode from Global Configuration andother modes.AllexceptPE andUECommand Description Mode a
