1190 OSPF CommandsCommand ModeOSPFv2 Router Configuration modeUser GuidelinesState changes are logged with INFORMATIONAL severity.max-metric router-lsaUse the max-metric router-lsa command in router OSPF GlobalConfiguration mode to configure OSPF to enable stub router mode.To disable stub router mode, use the no max-metric router-lsa command inOSPFv2 Global Router Configuration mode.Syntaxmax-metric router-lsa [on-startupseconds] [summary-lsa {metric}]no max-metric router-lsa [on-startup] [summary-lsa]Parameter DescriptionDefault ConfigurationBy default, OSPF is not in stub router mode.Command ModeOSPFv2 Global Configuration modeParameter Descriptionon-startup (Optional) OSPF starts in stub router mode after a reboot.seconds (Required if on-startup) The number of seconds that OSPFremains in stub router mode after a reboot. The range is 5 to86,400 seconds. There is no default value.summary-lsa (Optional) Set the metric in type 3 and 4 summary LSAs toLsInfinity (0xFFFFFF).metric (Optional) Metric to send in summary LSAs when in stubrouter mode. Range is 1 to 16,777,215. Default is 16,711,680(0xFF0000).
