1038 IPv6 Routing CommandsThe following example displays the long form of the command, and indicateswhether address autoconfiguration or DHCP client are enabled on theinterface. When the interface acts as a host interface, the output also showsthe default gateway on the interface, if one exists.console#show ipv6 interface vlan2IPv6 is enabledIPv6 Prefix is ................................FE80::211:88FF:FE2A:3E3C/1282017::A42A:26DB:1049:43DD/128 [DHCP]Routing Mode................................... EnabledAdministrative Mode............................ EnabledIPv6 Routing Operational Mode.................. EnabledBandwidth...................................... 100000 kbpsInterface Maximum Transmit Unit................ 1500Router Duplicate Address Detection Transmits... 1Address Autoconfigure Mode..................... DisabledAddress DHCP Mode.............................. EnabledRouter Advertisement NS Interval............... 0Router Advertisement Lifetime.................. 1800Router Advertisement Reachable Time............ 0Router Advertisement Interval.................. 600Router Advertisement Managed Config Flag....... DisabledRouter Advertisement Other Config Flag......... DisabledRouter Advertisement Router Preference......... mediumRouter Advertisement Suppress Flag............. DisabledIPv6 Destination Unreachables.................. EnabledIPv6 Default Router............................fe80::213:c4ff:fedb:6c42show ipv6 interface management statisticsUse the show ipv6 interface management statistics command in PrivilegedEXEC mode to show the DCHPv6 client statistics.
