Dell PowerConnect 7000 Series Reference Manual

Also see for PowerConnect 7000 Series: Stacking instructions Technical white paper

Contents

Dell PowerConnect 7000 Series Reference Manual Manual pdf 871 page image

DHCP Server and Relay Agent Commands 871no client-nameParameter DescriptionDefault ConfigurationThere is no default client name.Command ModeDHCP Pool Configuration modeUser GuidelinesUse the show ip dhcp pool command to display pool configurationparameters. The client name should not include the domain name as it isspecified separately by the domain-name (IP DHCP Pool Config) command.It is not recommended to use embedded blanks in client names.Exampleconsole(config-dhcp-pool)#client-identifier01:03:13:18:22:33:11console(config-dhcp-pool)#host 192.168.21.34 32console(config-dhcp-pool)#client-nameLine_Printer_Hallwaydefault-routerUse the default-router command in DHCP Pool Configuration mode to setthe IPv4 address of one or more routers for the DHCP client to use. Use theno form of the command to remove the default router configuration. Use theshow ip dhcp pool command to display pool configuration parameters.Syntaxdefault-router {ip-address1}[ip address2]Parameter Descriptionname The name of the DHCP client. The client name is specified asup to 31 printable characters.