Configuration and Image File Commands 1389Images currently available on Flash------------------------------------------------------------------unit image1 image2 current-active next-active------------------------------------------------------------------1 0.31.0.0 0.31.0.0 image2 image2show running-configUse the show running-config command in Privileged EXEC mode to displaythe contents of the currently running configuration file, including bannerconfiguration. The command only displays the configurations that are non-default.NOTE: All non-default configurations for the Captve Portal branding images andencoded Unicode are not displayed via the standard show running-configcommand. If desired, you can view this data in the script files or by using the allmode for the show running-config command. In addition, please note that this non-readable data is contained and displayed at the end of the script files.Syntaxshow running-config [all |scriptname]•all-—To display or capture the commands with settings andconfiguration that are equal to the default value, include thealloption.•scriptname-—If the optionalscriptname is provided, the output isredirected to a script file.NOTE: If you issue the show running-config command from a serial connection,access to the switch through remote connections (such as Telnet) is suspendedwhile the output is being generated and displayed.Default ConfigurationThis command has no default configuration.Command ModePrivileged EXEC mode
