Command Groups 89Ethernet Configurationlogging email message-typeto-addrConfigures the To address field of the email. GClogging email from-addr Configures the From address of the email. GClogging email message-typesubjectConfigures the subject. GClogging email logtime Configures the value of how frequently thequeued messages are sent.GClogging email test message-typeTests whether or not an email is being sent to anSMTP server.GCshow logging emailstatisticsDisplays information on how many emails aresent, how many emails failed, when the lastemail was sent, how long it has been since thelast email was sent, how long it has been sincethe email changed to disabled mode.PEclear logging email statistics Clears the email alerting statistics. GCsecurity Sets the email alerting security protocol. MSCmail-server ip-address|hostnameConfigures the SMTP server IP address andchanges the mode to Mail Server ConfigurationMode.GCport (Mail ServerConfiguration Mode)Configures the TCP port to use forcommunication with the SMTP servers.MSCusername (Mail ServerConfiguration Mode)Configures the username required by theauthentication.MSCpassword (Mail ServerConfiguration Mode)Configures the password required toauthenticate to the email server.MSCshow mail-server Displays the configuration of all the mail serversor a particular mail server.PEa. For the meaning of each Mode abbreviation, see Mode Types on page 79.Command Description Mode aclear counters Clears statistics on an interface. PECommand Description Mode a
