Configuring Differentiated Services 1103DiffServ Policy CreationBeginning in Privileged Exec mode, use the following commands to configureDiffServ policies and view related information.match protocol Add to the specified class definition a matchcondition based on the value of the IP Protocol fieldin a packet using a single keyword notation or anumeric value notation.match source-address mac Add to the specified class definition a matchcondition based on the source MAC address of thepacket.match srcip6 Add to the specified class definition a matchcondition based on the source IPv6 address of apacket.match srcl4port Add to the specified class definition a matchcondition based on the source layer 4 port of apacket using a single keyword, a numeric notation,or a numeric range notation.CLI Command Descriptionconfigure Enter global configuration mode.policy-mappolicy-name in Create a new DiffServ policy for ingress traffic andenter Policy Map Configuration mode for the policy.exit Exit to Privilege Exec mode.show policy-map Displays all configuration information for thespecified policy.show policy-mapinterface in Displays policy-oriented statistics information forthe specified interface.CLI Command Description
