Configuring a Captive Portal 477Configuring Captive Portal Groups and UsersBeginning in Privileged EXEC mode, use the following commands to create aCaptive Portal group. You can use the default group, or you can create a newgroup.Command Purposeconfigure Enter global configuration mode.captive-portal Enter Captive Portal mode.user groupgroup-id[namename]Configure a group. Each Captive Portal that requiresauthentication has a group associated with it. Only theusers who are members of that group can be authenticatedif they connect to the Captive Portal.•group-id — Group ID (Range: 1–10).•name — Group name (Range: 1–32 characters).useruser-id namename Create a new user for the local user authenticationdatabase.•user-id—User ID (Range: 1–128).•name—user name (Range: 1–32 characters).useruser-id passwordpasswordConfigure the password for the specified user.•user-id—User ID (Range: 1–128).•password—User password (Range: 8–64 characters).useruser-id groupgroup-idAssociate a group with a Captive Portal user. A user can beassociated with more than one group.•user-id — User ID (Range: 1–128).•group-id — Group ID (Range: 1–10).useruser-id session-timeouttimeoutEnter the number of seconds to wait before terminating asession for the specified user. The user is logged out oncethe session timeout is reached.•user-id — User ID (Range: 1–128).•timeout — Session timeout. 0 indicates timeout notenforced (Range: 0–86400 seconds)
