304 Managing General System SettingsConfiguring the Expansion SlotsBeginning in Privileged EXEC mode, use the following commands toconfigure and view information about the expansion slots and plug-inmodules (cards).clock summer-timedate {date month |month date}yearhh:mm {date month |month date}yearhh:mm [offsetoffset][zoneacronym]Use this command if the summer time does not start andend every year according to a recurring pattern. You canenter the month and then the date, or the date and then themonth.•date— Day of the month. (Range: 1-31.)•month — Month. (Range: The first three letters by name)•hh:mm — Time in 24-hour format in hours and minutes.(Range: hh: 0–23, mm: 0–59)•offset — Number of minutes to add during thesummertime. (Range:1–1440)•acronym — The acronym for the time zone to be displayedwhen summertime is in effect. (Range: Up to fourcharacters)CTRL + Z Exit to Privileged EXEC mode.show clock [detail] View information about the time. Include the detailkeyword to view information about the time zone andsummer time.Command Purposeconfigure Enter Global Configuration mode.slotunit/slot cardindex Configured the specified slot (1–2) to use the plug-inmodule identified by thecardindex number (CID). Toview the CID associated with each plug-in module, use theshow supported cardtype command.CTRL + Z Exit to Privileged EXEC mode.show slot Display status information about the expansion slots.show supported cardtype Display information about the plug-in modules the switchsupports.Command Purpose
