show mvrpSyntax show mvrpRelease Information Command introduced before Junos OS Release 10.2 for J-EX Series switches.Description Display Multiple VLAN Registration Protocol (MVRP) configuration information.Required PrivilegeLevelviewRelatedDocumentationshow mvrp statistics on page 1260•• Example: Configuring Automatic VLAN Administration Using MVRP on J-EX SeriesSwitches on page 1115• Verifying That MVRP Is Working Correctly on page 1162List of Sample Output show mvrp on page 1257Output Fields Table 166 on page 1257 lists the output fields for the show mvrp command. Output fieldsare listed in the approximate order in which they appear.Table 166: show mvrp Output FieldsField DescriptionField NameDisplays global MVRP information:• MVRP status—Displays whether MVRP is Enabled or Disabled.• MVRP dynamic vlan creation—Displays whether global MVRP dynamic VLAN creation is Dnabledor Disabled.Global MVRPconfigurationDisplays MVRP timer information:• Interface—The interface on which MVRP is configured.• Join—The maximum number of milliseconds the interfaces must wait before sending VLANadvertisements.• Leave—The number of milliseconds an interface must wait after receiving a Leave message toremove the interface from the VLAN specified in the message.• LeaveAll—The interval at which LeaveAll messages are sent on interfaces. LeaveAll messagesmaintain current MVRP VLAN membership information in the network.MVRP Timers (ms)Displays interface-specific MVRP information:• Interface—The interface on which MVRP is configured.• Status—Displays whether MVRP is Enabled or Disabled.• Registration—Displays whether registration for the interface is Forbidden or Normal.• Dynamic VLAN Creation—Displays whether interface dynamic VLAN creation is Enabled or Disabled.Interface basedconfigurationshow mvrp user@switch> show mvrpGlobal MVRP configurationshow mvrp1257Chapter 63: Operational Mode Commands for Bridging and VLANs
