• Understanding Multiple VLAN Registration Protocol (MVRP) on J-EX Series Switcheson page 1054• Understanding Ethernet OAM Connectivity Fault Management for a J-EX Series Switchon page 3463• Understanding Ethernet OAM Link Fault Management for a J-EX Series Switch onpage 3427• Understanding RSTP for J-EX Series Switches on page 1276• Understanding STP for J-EX Series Switches on page 1275• Understanding How to Use sFlow Technology for Network Monitoring on a J-EX SeriesSwitch on page 3283• Understanding VSTP for J-EX Series Switches on page 1281action-profile (Applying to OAM CFM, for J-EX Series Switch Only)Syntax action-profile profile-name {default-actions {interface-down;}}Hierarchy Level [edit protocols oam ethernet connectivity-fault-management]Release Information Statement introduced in Junos OS Release 10.2 for J-EX Series switches.Description Configure a name and default action for an action profile.Options profile-name—Name of the action profile.default-actions—Defines the action to be taken when connectivity to the remote MEP islost.interface-down—Brings the interface down when a remote MEP connectivity failure isdetected.Required PrivilegeLevelinterface—To view this statement in the configuration.interface-control—To add this statement to the configuration.RelatedDocumentation• Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 3468• Junos OS Network Interfaces Configuration Guide athttp://www.juniper.net/techpubs/software/junos/3479Chapter 131: Ethernet OAM Connectivity Fault Management
