show firewallSyntax show firewall counter-name> filter-name>log (detail | interface interface-name)terseRelease Information Command introduced before Junos OS Release 10.2 for J-EX Series switches.Description Display statistics about configured firewall filters.Options none—Display statistics about all configured firewall filters, counters, and policers.counter counter-name—(Optional) Display statistics about a particular firewall filtercounter.filter filter-name—(Optional) Display statistics about a particular firewall filter.log (detail | interface interface-name)—(Optional) Display detailed log entries of firewallactivity or log information about a specific interface.terse—(Optional) Display firewall filter names only.Required PrivilegeLevelviewRelatedDocumentationExample: Configuring Firewall Filters for Port, VLAN, and Router Traffic on J-EX SeriesSwitches on page 2755•• Verifying That Firewall Filters Are Operational on page 2799• Verifying That Policers Are Operational on page 2800• Firewall Filters for J-EX Series Switches Overview on page 2721• Understanding the Use of Policers in Firewall Filters on page 2752List of Sample Output show firewall on page 2842show firewall (filter filter-name) on page 2842show firewall (counter counter-name) on page 2842show firewall log on page 2842Output Fields Table 351 on page 2841 lists the output fields for the show firewall command. Output fieldsare listed in the approximate order in which they appear.Table 351: show firewall Output FieldsLevel of OutputField DescriptionField NameAll levelsName of the filter that is configured with the filter statement at the [edit firewall]hierarchy level.Filter2841Chapter 106: Operational Mode Commands for Firewall Filters
