show captive-portal firewallSyntax show captive-portal firewall<interface-name><interface-name detail>Release Information Command introduced before Junos OS Release 10.2 for J-EX Series switches.Description Display information about the firewall filters for each user that is authenticated on eachcaptive portal interface.Options none—Display all the firewall filters on all captive portal interfaces.brief | detail—(Optional) Display the specified level of output.interface-name—(Optional) Display all the terms of the firewall filters for the specifiedinterface.interface-name detail—(Optional) Display all of the terms of the firewall filters for thespecified interface.Required PrivilegeLevelviewRelatedDocumentationshow captive-portal authentication-failed-users on page 2471•• show captive-portal interface on page 2474• clear captive-portal on page 2466• Example: Setting Up Captive Portal Authentication on a J-EX Series Switch on page 2323• Configuring Captive Portal Authentication (CLI Procedure) on page 2350List of Sample Output show captive-portal firewall brief on page 2472show captive-portal firewall ge-0/0/10.0 on page 2472show captive-portal firewall on page 2473Output Fields Output fields for the show captive-portal firewall command include any action modifierspecified in firewall filters except policers. Policers are not supported in the terms of theinternally generated dynamic firewall filters that are created when multiple supplicantsauthenticate on 802.1X-enabled interfaces.show captive-portalfirewall briefuser@switch> show captive-portal firewall briefCaptive Portal Information:Interface State MAC address Usershow captive-portalfirewall briefge-0/0/1.0 Connectingge-0/0/10.0 Connecting 00:30:48:8c:66:bd No Usershow captive-portalfirewall ge-0/0/10.0user@switch> show captive-portal firewall ge-0/0/10.0Filter name: dot1x_ge-0/0/10Counters:2472Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
