show route tableSyntax show route table routing-table-name logical-system-name)>Syntax (J-EX SeriesSwitch)show route table routing-table-nameRelease Information Command introduced before Junos OS Release 10.2 for J-EX Series switches.Description Display the route entries in a particular routing table.Options brief | detail | extensive | terse—(Optional) Display the specified level of output.logical-system (all | logical-system-name)—(Optional) Perform this operation on all logicalsystems or on a particular logical system.routing-table-name—Display information about a particular routing table (for example,inet.0) where policy-based export is currently enabled. (For information about thedifferent types of routing tables, see the Junos OS Routing Protocols ConfigurationGuide.)Required PrivilegeLevelviewRelatedDocumentationshow route summary on page 2024•List of Sample Output show route table bgp.l2.vpn on page 2027show route table bgp.l3vpn.0 on page 2027show route table bgp.l3vpn.0 detail on page 2027show route table inet.0 on page 2028show route table inet6.0 on page 2029show route table inet6.3 on page 2029show route table l2circuit.0 on page 2029show route table mpls on page 2030show route table mpls extensive on page 2030show route table mpls.0 on page 2030show route table vpls_1 detail on page 2031show route table vpn-a on page 2031show route table vpn-a.mdt.0 on page 2031show route table VPN-AB.inet.0 on page 2031show route table VPN_blue.mvpn-inet6.0 on page 2032Output Fields For information about output fields, see the output field tables for the show routecommand, the show route detail command, the show route extensive command, orthe show route terse command.2026Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
