RelatedDocumentationConfiguring Unknown Unicast Forwarding (CLI Procedure) on page 2515•Verifying That the Port Error Disable Setting Is Working CorrectlyPurpose Verify that the port error disable setting is working as expected on MAC limited, MACmove limited and rate-limited interfaces on a J-EX Series switch.Action Display information about interfaces:user@switch> show ethernet-switching interfacesInterface State VLAN members Blockingge-0/0/0.0 up T1122 unblockedge-0/0/1.0 down default MAC limit exceededge-0/0/2.0 down default MAC move limit exceededge-0/0/3.0 down default Storm control in effectge-0/0/4.0 down default unblockedge-0/0/5.0 down default unblockedge-0/0/6.0 down default unblockedge-0/0/7.0 down default unblockedge-0/0/8.0 down default unblockedge-0/0/9.0 up T111 unblockedge-0/0/10.0 down default unblockedge-0/0/11.0 down default unblockedge-0/0/12.0 down default unblockedge-0/0/13.0 down default unblockedge-0/0/14.0 down default unblockedge-0/0/15.0 down default unblockedge-0/0/16.0 down default unblockedge-0/0/17.0 down default unblockedge-0/0/18.0 down default unblockedge-0/0/19.0 up T111 unblockedge-0/1/0.0 down default unblockedge-0/1/1.0 down default unblockedge-0/1/2.0 down default unblockedge-0/1/3.0 down default unblockedMeaning The sample output from the show ethernet-switching interfaces command shows thatthree of the down interfaces specify the reason that the interface is disabled:• MAC limit exceeded—The interface is temporarily disabled due to a mac-limit error.The disabled interface is automatically restored to service when the disable-timeoutexpires.• MAC move limit exceeded—The interface is temporarily disabled due to amac-move-limit error. The disabled interface is automatically restored to service whenthe disable-timeout expires.• Storm control in efffect —The interface is temporarily disabled due to a storm-controlerror. The disabled interface is automatically restored to service when thedisable-timeout expires.RelatedDocumentation• Configuring Autorecovery From the Disabled State on Secure or Storm Control Interfaces(CLI Procedure) on page 25162518Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
