Dell PowerConnect W AirWave 7.1 | User Guide Configuring and Using Device Groups in AWMS | 125Using Global Groups for Group ConfigurationTo apply group configurations using the AWMS global groups feature, first navigate to the Groups > Listconfiguration page. Click the Add button to add a new group, or click the name of the group to edit settings foran existing group. Click the Duplicate icon to create a new group with identical configuration to an existinggroup. To have global group status, a group must contain no devices; accordingly, access points can never be added toa global group. Global groups are visible to users of all roles, so they may not contain devices, which can bemade visible only to certain roles. Figure 71 illustrates this configuration page.Figure 71 Groups > List Page Illustration To set a group as a global group, navigate to the Groups > Basic configuration page for an existing or a newlycreated group. Select Yes for the Is Global Group field under the global group section. When the change issaved and applied, the group will have a check box next to fields on the Basic, Security, SSIDs, AAA Servers,Radio, Cisco WLC Config, LWAPP APs, PTMP/WiMAX, Proxim Mesh and MAC ACL tabs. Figure 72illustrates this configuration page.Figure 72 Groups > Basic Page for a Global Group When a global group configuration is pushed to subscriber groups, all settings are static except for settingswith the checkbox selected; for fields with checkboxes selected, the value or setting can be changed on thecorresponding tab for each managed group. In the case of the Groups > SSIDs configuration page, overrideoptions are available only on the Add configuration page (navigate to the Groups > SSIDs configuration pageand click the Add button). Global templates are also configurable as part of global groups; see “Creating andUsing Templates” on page 175 for more information. Once global groups have been configured, groups may be created or configured to subscribe to a particularglobal group. Navigate to the Group > Basic configuration page of a group and locate the Use Global Groupssection. Select the Yes radio button and select the name of the global group from the drop-down menu. Thenclick Save and Apply to push the configuration from the global group to the subscriber group. Figure 73illustrates this page.
