74 | Configuring AWMS Dell PowerConnect W AirWave 7.1 | User Guide3. The NMS Integration Add/Edit page includes the Netcool/OMNIbus Integration link. The IBM TivoliNetcool/OMNIbus operations management software enables automated event correlation and additionalfeatures resulting in optimized network uptime. Click this link for additional information, specifications, andbrief instructions for installation with AWMS.4. The NMS Integration Add/Edit page includes the HP ProCurve Manager Integration link. Click this link foradditional information, zip file download, and brief instructions for installation with AWMS. Click Add onthis page to finish creating the NMS server, or click Save to complete configuration of an existing NMS server.What Next? Navigate to additional tabs in the AMP Setup section to continue additional setup configurations. Complete the required configurations in this chapter prior to proceeding to ensuing chapters of this document.Dell support remains available to you for any phase of AWMS installation.Auditing PCI Compliance on the NetworkThis section describes PCI requirements and auditing functions in AWMS, with the following topics: Introduction to PCI Requirements PCI Auditing in the AWMS Interface Enabling or Disabling PCI AuditingIntroduction to PCI RequirementsAWMS supports wide security standards and functions in the wireless network. One component of networksecurity is the optional deployment of Payment Card Industry (PCI) Auditing.The Payment Card Industry (PCI) Data Security Standard (DSS) establishes multiple levels in which paymentcardholder data is protected in a wireless network. AWMS supports PCI requirements according to the standardsand specifications set forth by the following authority: Payment Card Industry (PCI) Data Security Standard (DSS) PCI Security Standards Council Websitehttps://www.pcisecuritystandards.org PCI Quick Reference Guide, Version 1.2 (October 2008)https://www.pcisecuritystandards.org/pdfs/pci_ssc_quick_guide.pdfTable 35 AMP Setup > NMS Integration Add/Edit Fields and Default ValuesSetting Default DescriptionHostname None Cites the DNS name or the IP address of the NMS.Port 162 Sets the port AWMS uses to communicate with the NMS.NOTE: AWMS generally communicates via SNMP traps on port 162.Community String None Sets the community string used to communicate with the NMS.SNMP Version v2C Sets the SNMP version of the traps sent to the Host.Enabled Yes Enables or disables trap logging to the specified NMS.Send ConfigurationTrapsYes Enables NMS servers to transmit SNMP configuration traps.
