Column DescriptionTypeDevice type. This parameter can be any of the following:l audio FF (fixed frequency)l bluetoothl cordless base FH (frequency hopper)l cordless phone FF (fixed frequency)l cordless network FH (frequency hopper)l generic FF (fixed frequency)l generic FH (frequency hopper)l generic interfererl microwavel microwave inverterl videol xboxNOTE: For additional details about non Wi-Fi device types shownin this table, see Table 15.ID ID number assigned to the device by the spectrum monitor orhybrid AP radio. Spectrum monitors and hybrid APs assign aunique spectrum ID per device type.Cfreq Center frequency of the signal sent from the device.Bandwidth Channel bandwidth used by the device.Channels-affected Radio channels affected by the wireless device.Signal-strength Strength of the signal sent from the device, in dBm.Duty-cycle Device duty cycle. This value represents the percent of time thedevice broadcasts a signal.Add-time Time at which the device was first detected.Update-time Time at which the device’s status was updated.Table 14 - Device Summary and Channel InformationNon Wi-Fi InterferersThe following table describes each type of non Wi-Fi interferer detected by the spectrum monitorfeature.Non Wi-FiInterferer DescriptionBluetooth Any device that uses the Bluetooth protocol to communicate in the 2.4 GHzband is classified as a Bluetooth device. Bluetooth uses a frequency hoppingprotocol.FixedFrequency(Audio)Some audio devices such as wireless speakers and microphones also usefixed frequency to continuously transmit audio. These devices are classifiedas Fixed Frequency (Audio).Table 15 - Non Wi-Fi Interferer TypesDell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 101 | Spectrum Monitor
