84 | Managing W-IAPs Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User GuideFigure 58- Standalone AP Conversion3. Select Standalone AP from the drop-down list.4. Select the Access Point from the drop-down list.5. Click Convert Now to complete the conversion.6. After the conversion the Access Point specified in the Dell W-Series Instant UI operates instandalone mode.Converting Back to a W-IAPThe reset button located on the rear of a W-IAP can be used to reset the W-IAP to factory defaultsettings. If you have converted your W-IAP to a campus AP or a Remote AP, pressing the resetbutton converts it back to a W-IAP.To reset a W-IAP, follow the instructions below:1. Power off the W-IAP.2. Press and hold the reset button using a small, narrow object, such as a paperclip.3. Power on the W-IAP without releasing the reset button. The power LED flashes within 5seconds indicating that the reset is completed.4. Release the reset button.The W-IAP then boots with the factory default settings.NOTE: All APs have a reset button, except W-IAP175P and W-IAP175AC. Contact Dellsupport for the backward conversion process on these W-IAPs.Rebooting the W-IAPIf you encounter any problem with the W-IAPs, you can reboot all W-IAPs or selected W-IAPs ina network using the Dell W-Series Instant UI. To reboot a W-IAP:1. Click the Maintenance link. The Maintenance window appears.2. Click the Reboot tab.
