To define the access rule to an existing network, click the network. The edit link appears.Click the edit link and navigate to the Access tab.2. In the WLAN Settings tab, enter the appropriate information. and click Next to continue.3. Use the VLAN tab, to specify how the clients on this network get their IP address and VLAN.Click Next to continue.4. Click Next and set appropriate values in the Security tab.5. Click Next. The Access tab appears. The Allow any to all destinations access rule is enabledby default. This rule allows traffic to all destinations. To define allow TCP service access rule toa particular network:a. Click New, the New Rule window appears.b. Select Allow from the Action drop-down list.c. Select custom from the Service drop-down list.n Select TCP from the Protocol drop-down list.n Enter appropriate port number in the Port(s) text box.d. Select to a network from the Destination drop-down list.n Enter appropriate IP address in the IP text box.n Enter appropriate netmask in the Netmask text box.Figure 116 - Defining Rule — Allow TCP Service to a Particular Networke. Click OK.6. Click Finish.Allow POP3 Service to a Particular Server1. Click the New link in the Networks tab.To define the access rule to an existing network, click the network. The edit link appears.Click the edit link and navigate to the Access tab.2. In the WLAN Settings tab, enter the appropriate information and click Next to continue.3. Use the VLAN tab, to specify how the clients on this network get their IP address andVLAN.Click Next to continue.4. Click Next and slide to set the appropriate security levels in the Security tab.Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 159 | Instant Firewall
