232 | Monitoring Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User GuideGraphName Description Monitoring Procedureoutgoing traffic is displayed ingreen. Outgoing traffic is shownabove the median line.l Incoming traffic — Throughput forincoming traffic is displayed inblue. Incoming traffic is shownbelow the median line.To see an enlarged view, click thegraph.l The enlarged view provides Last,Minimum, Maximum, and Averagestatistics for the incoming andoutgoing traffic throughput of theVirtual Controller for the last 15minutes.To see the exact throughput of theDell W-Instant network at a particulartime, hover the cursor over the graphline.Instant UI. The Virtual Controllerview appears. This is the defaultview.2. Study the Throughput graph in theUsage Trends pane. For example,the graph shows 2.0 kbpsoutgoing traffic throughput at12:00 hours. It also shows someincoming traffic throughput at thesame time.Client Alerts LinkFor information about the Client Alerts link, see "Clients Tab" on page 25 and "Alert Types andManagement" on page 249 sections.IDS LinkFor information about the IDS link, see "IDS" on page 39.Network ViewAll Wi-Fi networks in the Dell W-Instant network are listed in the Networks tab. Click thenetwork that you want to monitor. Network View for the selected network appears.Similar to the Virtual Controller view, the Network view also has three tabs— Networks, AccessPoints, and Clients.The following sections in the Dell W-Series Instant UI, provide information about the selectednetwork:l Infol Usage Trends
