Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 289 | TroubleshootingAppendix DTroubleshootingThe Support module Dell W-Instant provides CLI commands to view logs for APs.Viewing LogsTo view the log information for APs:1. At the top right corner of Dell W-Series Instant UI, click Support. The Support windowappears.2. Select the required option from the Command drop-down list. For example, AP ARMConfiguration.3. Select All Access Points or a specific W-IAP from the Target drop-down list for which youwant to view the AP ARM Configuration.4. Click Run.Support CommandsYou can view the following information for each access point in the Dell W-Instant network usingthe support window:l AP 3G/4G Status—Displays the cellular status of the W-IAPs.l AP 802.1X Statistics— Displays the 802.1X statistics of the selected W-IAP.l AP Access Rule Table— Displays all the ACL rules of the selected W-IAP.l AP Active— Displays all the APs of Instant.l AP Airgroup Cache— Displays the Bonjour mDNS records for the selected W-IAP(s).l AP Airgroup CPPM Entries —Displays the AirGroup CPPM policies of the registereddevices.l AP Airgroup CPPM Servers— Displays the AirGroup CPPM server information.l AP Airgroup Debug Statistics— Displays the debug statistics for the selected W-IAP(s).l AP Airgroup Servers— Displays information about the Bonjour devices which supportsAirprint and Airplay services for the selected W-IAP(s).l AP Airgroup User— Displays the IP/MAC address, device name, VLAN, type of connection ofthe Bonjour devices for the selected W-IAP(s).l AP Allowed Channels— Displays information of the allowed channels for the selected W-IAP.l AP All Supported Timezones— Displays all the supported time zones of Instant.l AP ARM Bandwidth Management— Displays bandwidth management information for theselected W-IAP.l AP ARM Channels— Displays channels of ARM in the selected W-IAP.l AP ARM Configuration— Displays configuration of ARM in the selected W-IAP.
