To pause and resume replication:1. In the Core Console, click the Replication tab.2. Under Outgoing Replication for a source core or Incoming Replication for a target core, click Pause Replication topause replication temporarily.3. Click Resume Replication to resume replication after it has been paused.Managing Replication SettingsYou can adjust a number of settings for how replication executes on the source and target cores.To manage replication settings:1. In the Core Console, click the Replication tab.2. In the Actions drop-down menu, click Settings.3. In the Replication Settings window, edit the replication settings as described below.Option DescriptionCache lifetime Specify the amount of time between each target-core status request performed by thesource core.Volume imagesession timeoutSpecify the amount of time the source core spends attempting to transfer a volume imageto the target core.Max. concurrentreplication jobsSpecify the number of agents permitted to replicate to the target core at one time.Max. parallel streams Specify the number of network connections permitted to be used by a single agent toreplicate that machine’s data at one time.4. Click Save.Removing ReplicationYou can discontinue replication and remove protected machines from replication in several ways. The options include:• Removing an Agent from Replication on the Source Core• Removing a Target Core from Replication• Removing an Agent on the Target Core• Removing a Source Core from ReplicationNOTE: Removing a source core results in the removal of all replicated agents protected by that core.Removing An Agent From Replication On The Source CoreTo remove an agent from replication on the source core:1. From the source core, open the AppAssure 5 Core Console, and click the Replication tab.2. Expand the Outgoing Replication section.3. In the drop-down menu for the agent you wish to remove from replication, click Delete.4. In the Outgoing Replication dialog box, click Yes to confirm deletion.66
