System Setup 77DisketteDrive(Internaldefault)Enables and disables the floppy drives and sets readpermission for the internal floppy drive. Off disables allfloppy drives. USB disables the internal diskette drive andenables a USB floppy drive, if the USB controller is enabledand a USB drive is connected. Internal enables the internalfloppy drive. Read Only enables the internal drive controllerand allows the internal floppy drive read-only permission.NOTE: Operating systems with USB support will recognize USBfloppy drives regardless of this setting.SATA 0through 2(On default)Enables (On) or disables (Off) a SATA drive.Displays the Controller type (SATA), Port number the driveis using, Drive ID number, and Capacity.SATAOperation(AHCIdefault)Determines the integrated SATA controller's operating mode,which can be either AHCI or ATA.SMARTReporting(Offdefault)Controls whether errors for integrated drives are reportedduring startup.Onboard DevicesIntegratedNIC(On default)Enables or disables the integrated NIC controller. Settings areOn, Off, On w/RPL, or On w/ PXE. When the On w/ PXE orthe On w/RPL setting is active, if a boot routine is not availablefrom the network server, the computer attempts to boot from thenext device in the boot sequence list.IntegratedAudio(On default)Enables (On) or disables (Off) the onboardaudio controller. You can also select Autoto use the add-in Audio controller.1394ControllerEnables (On) or disables (Off) a 1394 controller.
