System Setup 83LoadDefaultsRestores system setup options to their factory defaults.Event Log Allows you to view the Event Log. Entries are marked R forRead and U for Unread. Mark All Entries Read puts an R tothe left of all the entries. Clear Log clears the Event Log.POST BehaviorFast Boot(On default)When enabled, this feature reduces computer startup time bybypassing some compatibility steps. Off does not skip anysteps during computer startup. On starts the system morequickly.Numlock Key(On default)Determines the functionality of the numeric keys on the rightside of your keyboard. Off commands the right keypad keys tofunction as arrows. On commands the right keypad keys tofunction as numbers.OS Install(Offdefault)Determines the maximum amount of system memoryavailable to the operating system. When set to Off, all systemmemory is available to the operating system. When set to On,the maximum amount of memory available to the operatingsystem is 256 MB.NOTE: Some operating systems will not complete installationwith more than 2 GB of system memory.POST Hotkeys Determines whether the sign-on screen displays a messagestating the keystroke sequence that is required to enter theSetup program or the Quickboot feature. Setup & BootMenu displays both messages(F2=Setup and F12=Boot Menu). Setup displays the setupmessage only (F2=Setup). Boot Menu displays the Quickbootmessage only (F12=Boot Menu). None displays no message.KeyboardErrorsWhen set to Report (enabled) and an error is detected duringPOST, the BIOS will display the error message and promptyou to press to continue or press to enter thesystem setup program.When set to Do Not Report (disabled) and an error isdetected during POST, the BIOS will display the errormessage and continue booting the system.
