Check the cable connections for the following hardware, if applicable:– Power supply– Telephone– Answering machine– VoIP adapter– DSL filter– Splitter– Cable modem• If the printer is connected to a Digital Subscriber Line, install a DSL filter for the printer. A DSL filter minimizesinterference between the fax signals and Internet signals on the line. Connect the printer to the phone port onthe DSL filter, and connect the computer to the DSL/HPN port on the filter.To make sure that you connected the printer to the filter correctly, plug an analog phone into the port on theback of the printer, and then listen for a dial tone.• If the printer is connected to a VoIP line, then make sure that the printer is plugged into an active phone port.Plug the printer into the first port on the VoIP adapter, most often labeled as Phone Port or Phone Line 1.To make sure that the phone port is active, plug an analog phone into the port, and then listen for a dial tone.• If you are using a splitter, then make sure that you are using a phone splitter. Do not use a line splitter. To makesure that you are using the correct splitter, plug an analog phone into the splitter, and then listen for a dial tone.• If you have checked the items on this list but still do not hear a dial tone, then contact your line provider.Cannot send faxesIf the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:MAKE SURE THAT YOU HAVE REGISTERED YOUR USER INFORMATION IN THE PRINTERIf you did not enter your user information during initial setup, then enter your fax name and fax number. In somecountries, you cannot send a fax without entering your fax name or company name. Some fax machines also blockunknown faxes or faxes without sender information.D ECREASE THE TRANSMISSION SPEED OF THE FAX MODEMThe modem of the printer can transmit data at 33,600 bps. This is the maximum speed at which the printer cansend and receive faxes. It is not necessary, however, to set the modem to its fastest transmission capability. Thespeed of the modem of the receiving fax machine must match or be greater than the speed at which you aresending your fax. Otherwise, your fax will not be received.To decrease the transmission speed of the modem:1 From the printer control panel, press .2 Press the arrow buttons to scroll to Fax Setup, and then press .3 Press the arrow buttons to scroll to Dialing and Sending, and then press .4 Press the arrow buttons to scroll to Max Send Speed, and then press .5 Select a sending speed, and then press .Troubleshooting130
