Adding and Replacing Parts 133b Release the card by pressing the metal securing tabs until the card pops up slightly.c Lift the card out of its connector.NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors andrealign the card.5 Install the card:NOTICE: To avoid damaging the card, ensure that the antenna cable is not under the card when you click the cardinto place.a Align the card with the connector at a 45-degree angle, and press the card into the connector untilit clicks.b Connect the antenna cable to the antenna connector on the mini-card by matching the color ofthe cable to the color of the triangle above the connector. Connect the main cable (white) to theantenna connector with the white triangle. Connect the auxiliary cable (black) to the antennaconnector with the black triangle.NOTE: If your computer has a gray cable, connect it to the connector with the gray triangle, if one is availableon your card.6 Replace the memory cover. See "Memory" on page 129.7 Insert the battery into the battery bay, or connect the AC adapter to your computer and an electricaloutlet.8 Turn on the computer.1 mini card 2 metal securing tabs (2)12
