30 Using the Keyboard and Mouse2 Power on the mouse by sliding the power switch on the bottom of the mouse to the On position. Thered optical sensor lights when the mouse is on.3 Press the wireless (Bluetooth) connection button on the bottom of the mouse to put the mouse into"discover" mode.4 Click Next on the Wizard within 30 seconds to complete the pairing. The message Your mousehas been connected and is ready to use displays when the pairing is complete. Usethe mouse to click Finish to complete the pairing.If the mouse and computer fail to pair, see "Mouse Pairing Failed" on page 30.Mouse Pairing FailedIf the Mouse Connection Wizard does not launch or repeatedly fails to pair your mouse with thecomputer:1 Ensure the Bluetooth Wizards are enabled. Select Start→ All Programs→ Bluetooth→ Wizards, andclick OK on the Enable Wizards window.2 Power off the mouse by sliding the switch on the bottom of the mouse to the Off position.1 back button 2 forward button 3 wireless light4 scroll wheel 5 left mouse button 6 right mouse button7 power switch 8 wireless (Bluetooth)connection button9 optical sensor43215 6879
