Using the Keyboard and Mouse 313 Using the keyboard or touchpad, select Start→ Turn Off Computer→ and click Turn Off to shut downthe computer, then press the power button to restart the computer. Wait about three minutes for theoperating system to load and the computer to initialize the drivers.4 Follow the instructions on the Wizard. Power on the mouse by sliding the switch on the bottom of themouse to the On position, and press the wireless (Bluetooth) connection button on the bottom of themouse.5 Click Next on the Wizard within 30 seconds to complete the pairing. The message Your mousehas been connected and is ready to use displays when the pairing is complete. Usethe mouse to click Finish to complete the pairing. After completing the pairing, the blue wireless lighton the mouse will stop blinking and continue to light for 2 to 3 seconds, and then go out.Numeric KeypadThe numeric keypad functions like the numeric keypad on an external keyboard. Each key on the keypadhas multiple functions.• To enable the keypad, press . The light indicates that the keypad is active.• To disable the keypad, press again.Key CombinationsSystem Functions1 numeric keypad Opens the Task Manager window.19
