CONFIG-ROUTE-MAP modematch origin {egp | igp | incomplete}• Match routes specified as internal or external to OSPF, ISIS level-1, ISIS level-2, or locally generated.CONFIG-ROUTE-MAP modematch route-type {external [type-1 | type-2] | internal | level-1 | level-2 |local }• Match routes with a specific tag.CONFIG-ROUTE-MAP modematch tag tag-valueTo create route map instances, use these commands. There is no limit to the number of matchcommands per route map, but the convention is to keep the number of match filters in a route map low.Set commands do not require a corresponding match command.Configuring Set ConditionsTo configure a set condition, use the following commands.• Add an AS-PATH number to the beginning of the AS-PATH.CONFIG-ROUTE-MAP modeset as-path prepend as-number [... as-number]• Generate a tag to be added to redistributed routes.CONFIG-ROUTE-MAP modeset automatic-tag• Specify an OSPF area or ISIS level for redistributed routes.CONFIG-ROUTE-MAP modeset level {backbone | level-1 | level-1-2 | level-2 | stub-area}• Specify a value for the BGP route’s LOCAL_PREF attribute.CONFIG-ROUTE-MAP modeset local-preference value• Specify a value for redistributed routes.CONFIG-ROUTE-MAP modeset metric {+ | - | metric-value}• Specify an OSPF or ISIS type for redistributed routes.CONFIG-ROUTE-MAP modeset metric-type {external | internal | type-1 | type-2}• Assign an IP address as the route’s next hop.CONFIG-ROUTE-MAP modeset next-hop ip-address• Assign an IPv6 address as the route’s next hop.CONFIG-ROUTE-MAP mode120 Access Control Lists (ACLs)
