type of interface by a 0 bit, and the unused bit is always 0. These 2 bits are not given because they are themost significant bits, and leading zeros are often omitted.To display the interface number, use the following command.• Display the interface index number.EXEC Privilege modeshow interfaceExample of Deriving the Interface Index NumberTo view the system image on Flash Partition A, use the chSysSwInPartitionAImgVers object or, to view thesystem image on Flash Partition B, use the chSysSwInPartitionBImgVers object.Table 56. MIB Objects for Viewing the System Image on Flash PartitionsMIB Object OID Description MIBchSysSwInPartitionAImgVers1.3.6.1.4.1.6027.3.10.1.2.8.1.11List the version string ofthe system image inFlash Partition A.Chassis MIBchSysSwInPartitionBImgVers1.3.6.1.4.1.6027.3.10.1.2.8.1.12List the version string ofthe system image inFlash Partition B.Chassis MIBThe system image can also be retrieved by performing an SNMP walk on the following OID: MIB Object ischSysSwModuleTable and the OID is 1.3.6.1.4.1.6027.3.10.1.2.8.Dell#show interface Tengigabitethernet 1/21TenGigabitEthernet 1/21 is up, line protocol is upMonitor Port-ChannelsTo check the status of a Layer 2 port-channel, use f10LinkAggMib (.1.3.6.1.4.1.6027.3.2). In the followingexample, Po 1 is a switchport and Po 2 is in Layer 3 mode.Example of SNMP Trap for Monitored Port-Channels[senthilnathan@lithium ~]$ snmpwalk -v 2c -c public 10.11.1.1 .1.3.6.1.4.1.6027.3.2.1.1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.1.1 = INTEGER: 1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.1.2 = INTEGER: 2SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.2.1 = Hex-STRING: 00 01 E8 13 A5 C7SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.2.2 = Hex-STRING: 00 01 E8 13 A5 C8SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.3.1 = INTEGER: 1107755009SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.3.2 = INTEGER: 1107755010SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.4.1 = INTEGER: 1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.4.2 = INTEGER: 1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.5.1 = Hex-STRING: 00 00SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.5.2 = Hex-STRING: 00 00SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.6.1 = STRING: "Gi 5/84 " << Channelmember for Po1SNMPv2-SMI::enterprises.6027.3.2.1.1.1.1.6.2 = STRING: "Gi 5/85 " << Channelmember for Po2dot3aCommonAggFdbIndexSNMPv2-SMI::enterprises.6027.3.2.1.1.6.1.1.1107755009.1 = INTEGER: 1107755009Simple Network Management Protocol (SNMP) 803
