CONFIGURATION (conf-acl-vl-grp) modemember vlan {VLAN-range}5. Display all the ACL VLAN groups or display a specific ACL VLAN group, identified by name.CONFIGURATION (conf-acl-vl-grp) modeshow acl-vlan-group {group name | detail}Dell#show acl-vlan-group detailGroup Name :TestGroupSeventeenTwentyEgress IP Acl :SpecialAccessOnlyExpertsAllowedVlan Members :100,200,300Group Name :CustomerNumberIdentificationElevenEgress IP Acl :AnyEmployeeCustomerElevenGrantedAccessVlan Members :2-10,99Group Name :HostGroupEgress IP Acl :Group5Vlan Members :1,1000Dell#Configuring FP Blocks for VLAN ParametersUse the cam-acl-vlan command to allocate the number of FP blocks for the various VLAN processeson the system. You can use the no version of this command to reset the number of FP blocks to default.By default, 0 groups are allocated for the ACL in VCAP. ACL VLAN groups or CAM optimization is notenabled by default, and you need to allocate the slices for CAM optimization.1. Allocate the number of FP blocks for VLAN Open Flow operations.CONFIGURATION modecam-acl-vlan vlanopenflow <0-2>2. Allocate the number of FP blocks for VLAN iSCSI counters.CONFIGURATION modecam-acl-vlan vlaniscsi <0-2>3. Allocate the number of FP blocks for ACL VLAN optimization feature.CONFIGURATION modecam-acl-vlan vlanaclopt <0-2>4. View the number of flow processor (FP) blocks that is allocated for the different VLAN services.132 Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
