Enabling the Verification of Member Links Utilization in aHigh-Gigabit Port ChannelThis procedure is supported on the Z9000 platform.To examine the working efficiency of the high-Gigabit Ethernet port channel interfaces, perform thefollowing steps:1. Use the hg-link-bundle-monitor slot slotId npuUnit npuUnitId hg-port-channelportChannelId enable command in Global Configuration mode to enable this functionality todetect the working efficiency of the high-Gigabit port channel bundle interfaces.CONFIGURATION modeDell(conf)#hg-link-bundle-monitor slot 0 npuUnit 0 hg-port-channel 0 enable2. Specify the trigger threshold for higig link bundle monitoring.CONFIGURATION modeDell(conf)#hg-link-bundle-monitor trigger-threshold 303. Specify the interval in seconds for higig link bundle monitoring.CONFIGURATION modeDell(conf)#hg-link-bundle-monitor rate-interval 104. Enable the generation of traps for higig link-bundle monitoring.CONFIGURATION modeDell(conf)#snmp-server enable traps hg-lbm5. Use the show hg-link-bundle-distribution command to display the traffic-handling andutilization of the member interfaces of the port channel. The following table describes the outputfields of this show command.EXEC, EXEC Privilege modesDell#show hg-link-bundle-distribution 0 npuUnit 5 hg-port-channel 0Viewing Buffer Utilization and Queue Statistics on High-Gigabit Ethernet Backplane PortsThis functionality is supported on the Z9000 platform.You can now view the queue statistics and buffer utilization counters for the internal leaf port and spineport queues using the appropriate show commands. Transmit and receive counters and drop countersper queue are computed and displayed for internal queues on high-Gigabit Ethernet ports in the leaf andspine nodes. Buffer utilization counters supported for front-end ports are extended to high-Gigabitbackplane ports.Buffer counters include a new metric or parameter called Total Count cells. This field contains the totalnumber of cells currently being used by all queues on all ports in a port pipe. The f10-bp-stats.mib is forstatistics collection of backplane ports. Valid backplane ports for leaf NPU units range from 34-41 and for444 Link Aggregation Control Protocol (LACP)
